Annadue Robot Vacuum Won’t Connect To Wifi

Robot Vacuum cleaners are not necessarily a replacement for your vacuum cleaner thanks to the tough cleaning tasks. However, you can be sure that the frequency of doing the tough jobs will be reduced once you get an Annadue Robot Vacuum.

The Annadue robot vacuum is pretty easy to use, but for the first time users, there are some complexities that you might want heads up information, prior to using. Before using the Annadue robot vacuum, homeowners must prepare the floor, by removing the loose wires, and pick up pieces of toys, clothes, books, or crayons that might have been strewn all over the floor.

And the task of getting rid of the fine dust on the floor, the strands of hair, and bread crumbs can be left for the robot vacuum. The unit is totally customizable, through Wi-Fi, which then enables the user to change the cleaning modes from dry to wet mopping.

And while you can use Wi-Fi to achieve the relevant cleaning mode, it is likely that on certain occasions your Annadue robot vacuum won’t connect to your home Wi-Fi network, simply because other home appliances are interfering with the 2.4 GHz frequency. No need to panic though because, to initiate the Wi-Fi connection all you have to do is switch off the other appliances, such as the microwave or baby monitor.

Annadue Robot Vacuum

The Annadue robot vacuum is a smart cleaner that will keep dirt and debris away from your home, effortlessly. The unit is compact sized to enable access in the hard to reach areas, is highly customizable, and quite innovative given its competitors in the robot vacuum industry. Homeowners using the Annadue can create a cleaning schedule and with the Wi-Fi connection, they can begin their cleaning task while still in bed.

We must however note that the above will rarely be possible if your robot vacuum won’t connect to your Wi-Fi network. Certain events such as putting the wrong password, for the 2.4GHz network might have you burst your brain cells thinking that the robot vacuum is faulty, yet you just need to ensure that you have entered the correct password for the 2.4GHz network with zero typing errors.

Connection to Wi-Fi can also be hampered if the initial set up process wasn’t done correctly. Check below for the process of resetting your robot vacuum.

Review the initial device set up process

One thing that most users don’t understand when setting up their robot vacuum’s dock station is that unless the Wi-Fi signals can transmit up to where the installation had been done, then there won’t be any connection. So during the re-installation process, ensure that the robot dock has been placed 10ft from the Wi-Fi access point, try ensuring that this happens in the same room.

Both the robot and the dock should not be placed one foot away from the Wi-Fi access point as it may encourage oversaturation of the Wi-Fi receivers. And when you complete the setup process, identify your preferred installation location and ensure that the Wi-Fi signals can be communicated to the robot vacuum and the dock, after installation.

Steps to observe if your Annadue robot vacuum won’t connect to Wi-Fi

  • Remember that the customization process of your robot vacuum will proceed from your phone; you must therefore ensure that your phone can connect to Wi-Fi before integrating it with your robot.
  • If your router is a dual-band, there are high chances that it could be broadcasting both the 2.4GHz and the 5GHz. You will, therefore, want to make sure that you are connected to the 2.4 GHz frequency and that the router is also broadcasting in the 2.4GHz frequency.
  • No connection can be achieved if the robot is not turned on, so ensure that your robot vacuum is on as you begin the Wi-Fi connectivity process.
  • And for your router ensure that the Wi-Fi isolation feature has been turned off.

Watch out for obstacles

Dead zones created by large concrete walls and metal objects are one thing but your robot going under the cabinet and losing its Wi-Fi connectivity is quite another. If you have dead zones caused by physical barriers then you must reconsider the orientation of your dock and your robot vacuum. But if your unit goes under the cabinet and it won’t connect then all you have to do is wait for it to come out and resume the Wi-Fi connection.

Problem
Cause
Solution
The robot is barely mobile
Strands of hair and thread on the wheel
Flip the robot, unclip the cover, and get rid of the threads and strands of hair
The robot leaves the floor dirty
The side brushes are dirty
Ensure to clean the side brushes from time to time
The robot vacuum seems to be dead
Faulty motor caused by blocked filters
Clean the pre-filter, clean the exhaust filter, and be sure to replace the filter after every six months
The robot vacuum does not run smoothly
The dust box is full
Empty the dust box after each use

Conclusion

While getting a robot vacuum will relieve you from the frequent cleaning processes, don’t be in a hurry to throw away your vacuum cleaner because there are certain tasks that the Annadue Robot vacuum might not perform so well.

Joe Smith

Given the influx of new technologically advanced gadgets in the various markets, many people have fallen prey to unscrupulous businessmen and women who manufacture knock-off products to make profits from unsuspecting buyers. Because of the above Joe Smith has made it his mission, to review most of the new technological gadgets; robot vacuum cleaners are still making their way into both the first and third world countries and without the proper information many people will end up with less durable gadgets. The information compiled at Clean House Guide is illuminating for people looking to invest in the robot vacuum cleaners. When not researching on the new tech gadgets, Joe loves to spend time with his family.

Leave a Comment