How to clean Roomba 980 filter

Robot vacuums are an easy way of keeping your home clean and tidy, but they aren’t entirely self-sufficient. They need periodic maintenance to prevent them from breaking down so your vacuum can tackle chores as well as it should.

No matter how efficient your robot vacuum is at navigating through your home cleaning all the dirt and debris, it will require periodic servicing and cleaning the dirt and debris off its wheels, brushes, sensors, and filters will keep it in tip-top shape. But how do you clean Roomba 980 filter? Roomba 980 filter isn’t designed to be washed or be cleaned with any liquid because it can ruin the filter and also damage the robot. You just simply shake off the dust and debris by tapping the filter against your dustbin.

Why you should clean the Roomba filters

If you want your Roomba 980 to function properly and effectively for a long time, you need to keep it properly maintained. How often you change the filter will depend on how often you use your Roomba vacuum. Even when you don’t use it often, you should clean the filter after every cycle to prevent it from clogging and overheating and this will increase your vacuum’s performance significantly.

Cleaning your Roomba filter

It’s recommended that you replace your Roomba filter after every 2-3 months and if before this period you notice a reduction in your vacuum’s suction power, you should replace the filter. Make sure you clean your filter once or twice a week if you have pets using compressed air or with water for deep cleaning but ensure it’s completely dry before putting it back. However, not all filters are washable.

How often you should maintain each part of your Roomba vacuum

Part
Care frequency
Replacement frequency
Filters
Once or twice a week
After 2 months
Dustbin
After every use
Floor tracking sensor
Once a month
Cliff sensors
Once a month
Full bin sensors
Once every 2 weeks
Brushes
Once or twice a week
After 6-12 months
Charging contacts
Once a month

How to clean your Roomba filter

  • Press the bin icon above the release to detach the dustbin and lift it out.
  • Open the filter door and remove the filter by holding the tab. You might need to use a bit of force to open the filter door because the advanced anti-allergen system in your robot vacuum has a sealed filter door designed to trap all the mold and pollen in the air in your home.
  • Remove all the dirt and debris by shaking it against your dustbin. You can also use compressed air to remove the debris, but if you choose to clean your filter with water, you should make sure it’s completely dry before you put it back in your vacuum. If you put it back before it’s completely dry, it might damage your vacuum. You can also use a wet cloth instead of water, but also make sure it’s completely dry before putting it back.
  • Put the filter back in your vacuum and close the filter door. The filter door won’t close if you don’t reinsert the filter correctly.

Regular maintenance

To get your Roomba vacuum to perform optimally for a long time, you must perform regular maintenance for it to maintain its good performance. You can decide to do maintenance after every use or after several uses, the important point is to do it instead of not at all. The most basic maintenance includes emptying the dustbin after a cleaning cycle to avoid the buildup of dirt, cleaning your filters, brushes, and other detachable components in your vacuum.

Cleaning brushes and bearings

Your Roomba filters aren’t the only components that require regular cleaning, your brushes and bearings also need to be cleaned at least once a week if you use your Roomba vacuum daily. You can easily detach the combs to remove any hair or fur using a comb or any other tool. Also, make sure to clean the bearings to remove any dirt or debris.

Cleaning the front wheels

Your vacuum’s wheels are the first parts that come into contact with dirt and debris on your floor and build up around them as they rotate around your floor. String and hair get entangled on the wheels which can be difficult to remove, that’s why you need to regularly check for objects or strands coiled around the wheels. The front wheels are detachable so you can use your fingers to remove dirt and debris or use the best tool for the job before putting them back.

Wiping the sensors

Dirt and dust can confuse your vacuum’s sensors whether it’s using the optical system, lidar, or basic navigation system, it won’t work properly if it can’t sense or see its surrounding clearly. You can use a damp microfiber cloth, cotton swab, or magic eraser to wipe the grime off the sensors. Wipe the cliff sensors at the bottom of your robot, the laser turrets, and the optical sensor lenses at the top.

Conclusion

If you don’t want your Roomba 980 robot vacuum to perform lower than expected or malfunction, you should perform regular cleaning of the filters, brushes, sensors, and other detachable components.

Joe Smith

Given the influx of new technologically advanced gadgets in the various markets, many people have fallen prey to unscrupulous businessmen and women who manufacture knock-off products to make profits from unsuspecting buyers. Because of the above Joe Smith has made it his mission, to review most of the new technological gadgets; robot vacuum cleaners are still making their way into both the first and third world countries and without the proper information many people will end up with less durable gadgets. The information compiled at Clean House Guide is illuminating for people looking to invest in the robot vacuum cleaners. When not researching on the new tech gadgets, Joe loves to spend time with his family.

Leave a Comment